Your next step
Tell us where you need comfort.
We’ll check your room sizes, postcode, existing heating or cooling, preferred indoor and outdoor unit positions, and the electrical work before we confirm your price.
- Haier model and capacity matched to your space
- Eligible discount shown upfront
- Installation scope and extras explained
- Licensed installation and commissioning
Have photos of the room, outside wall and switchboard? They can help us provide a more accurate quote.
Request your air conditioning quote
Share your details and our team will assess your installation.
Four clear NSW starting prices
Choose the Haier size that looks right.
All four are 600 Series QP reverse-cycle split systems for heating and cooling. Room examples are a guide, not a sizing calculation. Click a card to start your multi-room estimate below.
Haier 600 Series QP
2.5 kW cooling
Bedroom or study
$1,888 installed from
3.2 kW heating · Rated COP 4.64
Model AS25QCFHRA-SET
Haier 600 Series QP
3.5 kW cooling
Larger bedroom or smaller living area
$1,988 installed from
3.7 kW heating · Rated COP 4.46
Model AS35QCFHRA-SET
Haier 600 Series QP
6.0 kW cooling
Living area
$2,188 installed from
7.0 kW heating · Rated COP 4.05
Model AS60QEEHRA-SET
Haier 600 Series QP
8.0 kW cooling
Larger open-plan area
$2,388 installed from
9.0 kW heating · Rated COP 3.93
Model AS80QFFHRA-SET
Prices supplied by Accredited Power Saver for NSW customer contributions, including GST. One eligible standard installation per listed price. Indoor head image is representative of the 600 Series QP range; physical dimensions vary by size. Capacity is cooling output, not electricity draw. Rated COP is a standard-test heating efficiency figure and will vary in use. Victorian prices and non-standard work require a separate quote.
Interactive price builder
Plan the rooms you want to heat and cool.
Build a starting estimate for one to four Haier split systems. Tell us the state and whether you are replacing an old unit. We’ll confirm the right sizes and eligible discounts in the written quote.
Your NSW starting estimate
$1,888
Select the rooms you want to upgrade.
Standard installation assumptions apply. We confirm suitability and itemise extras in your quote.
Get my tailored quote →NSW prices: 2.5 kW $1,888, 3.5 kW $1,988, 6.0 kW $2,188, 8.0 kW $2,388, including GST. The total adds each room’s starting price and does not add a rebate again. Multiple rooms, wiring, access, switchboard work, removal and eligibility can change the final total. The supplied NSW price sheet gives no Victorian price, so Victoria shows “Quote required”. Replacing an old unit does not change the four starting prices in that sheet. This tool does not confirm the rebate or system size.
Understand the discount
What rebate applies to your home?
Choose a state. Eligible certificate-based discounts are generally applied to the installed quote upfront. They are not cash payments you claim after installation, and they cannot be subtracted again from a price already discounted.
NSW: upfront discount through eligible schemes
The Energy Savings Scheme rewards lower energy use. A separate Peak Demand Reduction Scheme can also recognise reduced demand at busy times when the installation qualifies. An accredited provider manages eligible certificates. These are two possible certificate streams contributing to one quote, not two cheques for the customer.
The government amounts are examples, not guaranteed savings for the four Haier models. Actual discounts depend on model, existing system, location, rules and certificate prices. Your quote identifies the discount and final customer contribution.
Sources: NSW air conditioner incentive and Victorian heating and cooling discounts. Figures checked 30 September 2026.
Why the upgrade can pay in comfort
Get warmth and cooling from one system.
Reverse-cycle units move heat rather than making all the heat directly with an electrical element. That is why the right system can use less electricity than an old resistance heater for the same heat delivered.
Australian reverse-cycle models can transfer 3 to 6 units of heating or cooling energy per unit of electricity under relevant conditions. This is a category range, not a savings promise for your home.
Haier’s published nominal heating COP for the 2.5 kW QP model. The 3.5 kW is 4.46, 6 kW is 4.05 and 8 kW is 3.93. Seasonal performance varies with climate and use.
The NSW Government’s indicative annual energy-bill saving range for a more efficient reverse-cycle unit compared with an old system. Your result may be different.
What a COP of 4.64 means
In a standard heating test, the 2.5 kW model delivers about 4.64 kWh of heat for each 1 kWh of electricity it uses. It is a performance rating, not the capacity of the room or a fixed bill reduction.
Comparison illustrates heating at the published rated COP, before installation, defrost, outdoor temperatures and room heat losses. It is not a forecast of running cost. Source: energy.gov.au heating and cooling, NSW reverse-cycle guide and Haier QP specifications.
Check the best size for my room →Practical installation examples
What might an upgrade look like at home?
These example room plans show how the listed NSW prices work. We confirm unit size, location, electrical supply and any rebate before turning an example into your written quote.
One smaller room
A 2.5 kW Haier can be a starting point for a bedroom or study. We check room conditions and a suitable outdoor position.
From $1,888One eligible standard NSW installation, including GST.
One larger space
A 6.0 kW unit can be considered for a living area. Glazing, insulation and an open plan layout can change the sizing.
From $2,188One eligible standard NSW installation, including GST.
Bedroom + living
Choose a 2.5 kW and a 6.0 kW single split for separate room control, with an indoor and outdoor unit for each.
From $4,076Simple sum of the two listed NSW starting prices.
These are planning examples, not completed customer case studies. Multi-unit installation scope and eligibility must be assessed; final price may differ.
We look inside
Room dimensions, ceiling height, sun exposure, insulation and a position that moves air through the space.
We look outside
Outdoor unit access, noise, drainage, power supply, pipe length and whether additional electrical work is needed.
From enquiry to working air con
A clear quote, then a careful installation.
Tell us your rooms
Share the spaces, postcode, existing heater or air con and where the units might go.
We check eligibility
We confirm a suitable approved model and any applicable upfront discount before work starts.
See the full price
Your written quote names the unit, customer contribution, scope and any required extras.
Install and test
Qualified installers fit and commission the system, then show you how to use it.
What a starting price means
It is a supply-and-install starting price for an eligible standard NSW installation. Longer pipe or cable runs, difficult access, switchboard work, removal of an old system or special mounting can affect the final quote. We identify these before installation.
The people behind the quote
A real team, with real follow-through.
Accredited Power Saver has helped Australian homes upgrade since 2011. We coordinate the assessment, product selection, discount paperwork and installation through qualified trades.
Want to spread the cost?
Ask us about current 0% interest finance options through Brighte or Plenti. We can help submit an application. Each lender sets its own eligibility, fees and repayment terms, which we confirm before you apply.
Hear from our customers
Answers before you book
Air conditioning questions, answered.
What does the $1,888 price cover?
It is the starting supply-and-install customer price including GST for one eligible 2.5 kW Haier system in NSW with standard installation conditions. Your quote confirms the model, discount, electrical work and any extras.
Can I subtract a government rebate from these prices?
No. These are customer starting prices from APS’s NSW sheet. If you qualify, your written quote will show the applicable discount and final payable amount. A certificate value is not an extra cash rebate paid to you.
Will my old heater affect the discount?
It can. NSW and Victorian programs use different rules for new installations and replacement of an old split, gas heater or resistance heater. Tell us what is installed so we can check your actual pathway before quoting.
Which size should I choose?
Use the cards and builder as a starting point. A correct recommendation considers the room dimensions, ceiling height, glazing, sun exposure, insulation and how you use the space. Bigger is not always better.
Do you offer ducted or multiple-room systems?
Yes, we can assess multiple split systems and ducted options. The four displayed prices apply to individual Haier wall-mounted split systems in NSW. Ducted and multi-split work needs a tailored quote.
How long does installation take?
A straightforward single split is often completed in a day. Multiple units, electrical upgrades and difficult access can take longer. Your quote and booking confirmation will set out the plan.
Does the Haier unit have Wi-Fi control?
The listed 600 Series QP models have built-in Wi-Fi control through SmartHQ, subject to device, network and app setup. We can show you how to use it after commissioning.
Ready to find the right system?
Tell us your rooms and existing heater. We’ll confirm the price and discount for your home.