The simple explanation
Think of a fridge in reverse.
A fridge moves heat out of its cabinet. A hot water heat pump moves heat from the air into your water. Tap each step to follow the loop.
Illustration of heat transfer, not a product diagram.
01Air comes in
A fan draws surrounding air across the evaporator. There is useful heat in the air even when it feels cool outside.
02Heat is collected
Refrigerant inside the sealed system absorbs that heat and changes into a gas. The air and your drinking water never mix with the refrigerant.
03The compressor lifts the temperature
The compressor raises the refrigerant's pressure and temperature, preparing it to heat the stored water.
04Your water warms, and the loop repeats
A heat exchanger passes heat into the tank. The refrigerant cools, returns to the evaporator and gathers more heat.
The compressor and fan use electricity. Efficiency varies with the model, air temperature, hot water use and settings.
See the efficiency difference
What could a more efficient system mean for your bill?
If you currently use a conventional electric storage heater, move the slider to see an illustrative comparison of the electricity used for hot water.
Unsure of this number? Start with the example amount, then ask us for an assessment based on your home.
Method: heat pump electricity use is modelled at 30% of a conventional electric hot water system for the same hot water demand and effective electricity price, based on Australian Government guidance. It excludes installation cost, tariff changes, gas, solar export value and any electric boost. Your actual use and savings will differ. For a gas replacement, request a personalised comparison.
Your home, your power
No solar? No problem. Have solar? Put it to work.
A heat pump works with grid electricity on its own. If you have rooftop solar, the right controls may let it heat your water during sunny hours.
Without rooftop solar
The heat pump still transfers heat from the air. Choose a suitable tariff and schedule with your installer; the cheapest time to run depends on your electricity plan and how much hot water your household needs.
With rooftop solar
Ask about a daytime timer or solar-aware controller. The tank stores hot water for later, so you may use more of your own generation. If solar output is low, the system can still draw from the grid.
Solar self-consumption savings depend on generation, other household loads, your import tariff and the value of exported electricity. See the Australian Government's hot water guidance for more on timers and controls.
One principle, two layouts
Which heat pump shape suits your space?
Both use the same air-to-water principle. The difference is where the heat pump sits in relation to the storage tank.
All-in-one
The fan, compressor and tank are packaged together. It keeps the installation in one footprint, subject to height, ventilation and access requirements.
- Often suits a straightforward tank replacement
- Needs appropriate airflow and clearance around the unit
Split system
The heat pump and storage tank are separate. This can offer more placement options, depending on the model and site.
- Can help when tank and outdoor unit need different positions
- Requires a suitable location and connection route for both
We assess access, noise, airflow, capacity and your household's hot water use before recommending a model.
What happens at your home
The right installation starts with a few practical checks.
A heat pump needs more than a spot for the tank. These are the details we look at before recommending a system.
Hot water demand
Household size, peak shower times and the capacity needed for reliable supply.
Location and airflow
Space, ventilation, access, drainage and the manufacturer's required clearances.
Electrical and sound
Switchboard suitability, a safe connection and sensible placement near bedrooms or neighbours.
Climate and controls
Local winter conditions, model operating range, tariff and optional solar timing.
Already have an old unit? A photo of the tank, compliance plate, surrounding space and switchboard can help us assess the options.
Check my options →Good questions to ask
The details people want to know before upgrading.
Will it still work in winter?
Yes, a suitable heat pump can collect heat from cool air. Its efficiency and heating speed change with outdoor temperature, and models have different operating ranges. We check the local climate and product specification before recommending one.
Do I need rooftop solar?
No. A heat pump works from grid electricity. Solar can add another opportunity to lower running costs when the system is timed to use suitable daytime generation.
Is it noisy?
It has a fan and compressor, so it makes some sound while running. Sound levels vary by product and operating mode. Placement matters, especially near bedrooms and neighbouring homes.
Will I run out of hot water?
The tank needs to be sized for your household's peak demand. Heat pumps may recover more slowly than a gas instantaneous unit or an electric boost, so we consider usage patterns and the model's recovery rate when choosing capacity.
Can it replace my gas hot water system?
Often, yes. The suitability, electrical work and installation price depend on the existing plumbing, space and switchboard. Running cost savings compared with gas depend on your gas and electricity tariffs, so ask for a home-specific comparison.
Are there rebates or discounts?
Approved products and eligible installations may qualify for federal certificates and state-based incentives. Eligibility and value depend on your location, existing system and program rules. See how rebates and discounts work.
Ready for a practical answer?
Let's find the heat pump that fits your home.
Tell us about your current hot water system and where you live. We can help compare suitable models, available discounts and the installation details that matter.