SAVE over $1,000 every year by upgrading your HOT Water System*

AP Energy Efficiency
AP 7-5-2YR Warranty
AP Government Approved

Take advantage of the government’s commitment to saving energy costs. Sign up for a hot water upgrade in NSW now, and you’ll immediately start to save money, to produce reliable hot water 24/7.

The Government’s energy efficient/renewable energy schemes, enable us to replace your existing electric hot water system with a NEW energy efficient ‘heat pump hot water system’ for FREE.

Our energy efficient hot water systems are installed by fully licensed Plumbers and Electricians and are also heavily subsidised. Once your new heat pump hot water system is installed, they will provide you with Electrical and Plumbing NSW Fair Trading compliance certificates to certify their work.

You can then join the thousands of Australians who are realising significant savings of over $1000 a year with energy efficient heat pump hot water systems.

*As a requirement of the New South Wales energy savings scheme (ESS), each household must contribute at least $33 to the installation costs.

SAVE Up to 70% of your water heating bill with the NSW Energy Saving Scheme: Fully subsidised

Expect savings of well over $1,000 when you invest in a new hot water system as part of the NSW hot water upgrades program. You can save 70% of the cost of heating the water in your home when you replace your electric hot water system with new energy efficient heat pump hot water system. For an average house of 5 people, using 180 litres of hot water a day can equate to $1,000 per year saved!*

  • Energy efficient heat pumps SAVE money

Unlike conventional electric hot water systems, heat pumps don’t heat the water directly. They use electricity to keep the compressor going. Smart renewable technology drives the pump to draw heat from the surrounding air. It then transforms ambient thermal energy into hot water.

hot-water-system-05-free-02

A Heat Pump Hot Water System does not require gas or sunlight to provide your home with all the hot water your need. It is 350% more energy efficient than traditional water heaters.

The size of your water heating system should match your household requirements:

  215 litre capacity – is ideal for families of three to five people
  430 litre capacity – this twin system is ideal for families of 6 or more people

a fogged up shower screen

Reduce your carbon footprint

Care for the environment. The NSW hot water upgrades program enables you to reduce your household carbon footprint. Hot water production will use only 70% of the energy previously used when we replace your electric resistance hot water system.

  • Get your new HOT water system for FREE

To comply with building standards, you’ll need a licensed Electrician and Plumber as part of the NSW hot water upgrades scheme. We’ll replace your old system with the new hot water Heat Pump and then supply you with the required documentation. The compliance certificates below fall under the New South Wales Fair Trading regulations.

One size does not fit all

  • Hot water needs vary from family to family and we have your needs covered.

AP-Free-Hot-Water-White-System
Larger-heat-pumps-available
  • The New South Wales Government’s, Energy Saving Scheme requires a minimum customer contribution of $33 per home.

How do heat pumps make hot water?

1. Draws surrounding air: A fan draws in air, containing heat energy, across the evaporator.
2. Turns air into gas: The evaporator turns the liquid refrigerant into a gas. The compressor pressurises the refrigerant into a hot gas.
3. Heats water with gas: The hot gas inside the condenser coil heats the water inside the coil-wrapped tank.
4. Produces hot water: The refrigerant reverts back to a liquid after heating the water and continues to the evaporator for the process to start again.

How heat pumps work

  • A heat pump works in much the same way as a refrigerator or air conditioner. The heat pump extracts the heat from the surrounding air. It draws the air over the evaporator where compressed refrigerant gas emits heat under pressure. The heated gas runs through the condenser coil which is wrapped around the water heating tank. After heating the water, the gas returns to its liquid form and flows back into the compressor where it is compressed and the whole cycle starts again.

a tap running hot water
  • HOT water all day

  • Take advantage of the NSW Government’s Energy Saving Scheme and get your new Hot Water System installed and get peace of mind knowing you will have hot water whenever you need it.

FREE-HWS-Offer
  • Benefits of NSW HOT Water Upgrades Program

  • Save 70% of the cost of water heating

  • leaf-colour-edited

    Environmentally friendly technology, CFC-free renewable energy

  • good-quality-colour-edited

    Quiet, low-maintenance system

  • thermometer-edited-colour

    Wide operating range of between -7°C and 40°C

  • right-file-colour-edited

    Government subsidies slash the cost of installation

  • checked

    Water tank sized to meet your family requirements

Get your brand new and FREE Hot Water System. It‘s Cost Effective and Energy Efficient – start saving now!

Only fully licensed Electricians and Plumbers install our Hot Water Systems

Our team of Accredited Electricians and Plumbers will replace your existing hot water system with a brand-new Heat Pump Hot Water System. Enjoy cheap and uninterrupted hot water.

the accredited power team
FREE-HWS-Offer
nsw-map-0821-states-green
  • NEW SOUTH WALES

  • New South Wales Fair Trading – Compliance Certificate of Electrical Works.

  • New South Wales Fair Trading – Compliance Certificate for Plumbing and Drainage.

Request a FREE Heat Pump HOT Water System Today

  • To verify your eligibility we require photographs of:

  • 1. Your existing hot water system to confirm what type of system you currently have.

  • 2. A close up image of the existing hot water system compliance plate/serial number.

  • 3. The area around your hot water system – a two metre space is required.

  • 4. Your electrical switchboard to ensure we can add a new circuit.

  • 5. Clear access to your existing hot water system.

Enquiries

  • Book your HOT Water System – fully installed

Victoria

  • 03 8595 2022

New South Wales

  • 02 9051 1229

Email

nsw-map-0821-states-green

Send us an enquiry

  • Please advise your preferred time and method for us to contact you.

Scroll to Top