A new HOT water system upgrade can SAVE you $1,000 a year*

AP Energy Efficiency
AP 7-5-2YR Warranty
AP Government Approved

The federal and Victorian state governments are committed to helping households to save money on energy. Tap into this initiative for a subsidised hot water upgrade in Victoria. Australians are now saving over $1,000 a year to produce hot water.

Take advantage of the government’s Energy Saving initiatives and replace your existing electric or gas hot water system with an energy efficient Heat Pump hot water system and save over $1,000 every year.*

SAVE up to 70% of your water heating bill by taking advantage of the Victorian Energy Upgrades program

You can expect annual energy savings of more than $1,000 after installing your heat pump hot water system in Victoria. Traditional electric hot water systems are energy guzzlers. After the upgrade, you’ll save up to 70% of your household water heating costs. For a household of 5 people using 180 litres of hot water a day can expect to equate to over $1,000 saved every year.*

  • VIC HOT water upgrades 
    SAVE money

Heat pumps don’t directly heat the water in the same way as traditional water heaters. Instead, they draw electricity only to operate the compressor. The compressor, or pump, draws ambient heat from the air, using smart renewable energy to heat the water. It works in much the same way as a refrigerator or air conditioner, transferring heat rather than cold temperatures.


The size of your water heating system should match your household requirements:

  215 litre capacity – is ideal for families of three to five people
  430 litre capacity – this twin system is ideal for families of 6 or more people

  • Your new FREE Heat Pump HOT Water system

The heat pump hot water system for Victoria businesses and households is eco-friendly. They use only 70% of the energy drawn by your resistance hot water system. Reduce your carbon footprint, look after the environment and save money with your Victorian hot water upgrade.

One size does not fit all

  • Hot water needs vary from family to family and we have your needs covered.


How do heat pumps make hot water?

1. Draws surrounding air: A fan draws in air, containing heat energy, across the evaporator.
2. Turns air into gas: The evaporator turns the liquid refrigerant into a gas. The compressor pressurises the refrigerant into a hot gas.
3. Heats water with gas: The hot gas inside the condenser coil heats the water inside the coil-wrapped tank.
4. Produces hot water: The refrigerant reverts back to a liquid after heating the water and continues to the evaporator for the process to start again.
  • The process is the same as the one that powers your refrigerator, air conditioner or reverse cycle air conditioner (also known as a heat pump). When your reverse cycle air conditioner is working in winter, it is extracting the heat from the ambient air outside and pumping it into the house. That’s what a heat pump water heater does. It takes the heat from the ambient air and uses it to heat your hot water.

  • FREE HOT water systems and installations are heavily subsidised in Victoria

  • Save 70% of the cost of water heating

  • leaf-colour-edited

    Environmentally friendly technology, CFC-free renewable energy

  • good-quality-colour-edited

    Quiet, low-maintenance system

  • thermometer-edited-colour

    Wide operating range of between -7°C and 40°C

  • right-file-colour-edited

    Government subsidies slash the cost of installation

  • checked

    Water tank sized to meet your family requirements

Get your hot water upgrade in Victoria with government rebates. There has never been a better time to upgrade your water heating system.

Only fully licensed Electricians and Plumbers install our Hot Water Systems

Our team of Accredited Electricians and Plumbers will replace your existing hot water system with a brand-new Heat Pump Hot Water System. Enjoy cheap and uninterrupted hot water.

vic-map-0821 states-green

  • Energy Safe Victoria – Certificate of Electrical Safety.

  • Victorian Building Authority – Compliance Certificate.

Request an Energy Efficient Heat Pump HOT Water system upgrade today

  • To verify your eligibility we require photographs of:

  • 1. Your existing hot water system to confirm what type of system you currently have.

  • 2. A close up image of the existing hot water system compliance plate/serial number.

  • 3. The area around your hot water system – a two metre space is required.

  • 4. Your electrical switchboard to ensure we can add a new circuit.

  • 5. Clear access to your existing hot water system.

Contact Us

  • Book your HOT Water System – fully installed


  • 03 8595 2022

New South Wales

  • 02 9051 1229


vic-map-0821 states-green

Send us an enquiry

  • Please advise your preferred time and method for us to contact you.

Scroll to Top